AICO Ei146 Optical Smoke Alarm Mains Powered with Battery Back-Up
- Easi-Fit base
- 9V Alkaline Battery back up
- High performance optical chamber with integral insect screen
- Test/Hush button
- Advanced suppression and calibration technology
- Interconnectable to other Aico mains powered alarms
- Linkable to the Ei168RC
- Kitemarked to BS EN14604:2005
- 5 year guarantee
£27.01 Regular Price Special Price Excl. VAT £18.90
£22.68 Incl. VAT
The Ei146 is an Optical Smoke Alarm that runs on 230V AC mains power, and has a 9V alkaline battery back up in the event of mains failure. The 9V battery will last for up to 4 years in standby mode, and capable of powering the smoke detector for up to 2 years in the event of mains failure.
The Ei146 is supplied with the Easi-Fit base that allows very quick and simple installation of the smoke alarm, combined with simple detector head removal and replacement. The Easi-Fit base automatically connects both mains power and battery as the detector head slides on to the Easi-Fit base.
The Ei146 has other advanced features such as high performance optical chambers fitted with integral insect screens to reduce the chances of false alarms, as well as the ability to interconnect up to twelve alarms to allow all alarms to sound if just one of the interconnected alarms should be triggered.
The Ei146 has built in circuitry to aid suppression of voltage transients and RF interference to further reduce the chances of false alarms under such conditions.
Designed for applications where the budget is a key consideration and there is no requirement for lithium power cell back-up, the 140 Series provides an alkaline battery back-up instead of rechargeable cells. Further cost savings are possible through the use of Ei's innovative and totally unique Easi-fit technology, as there is no need to purchase additional wiring enclosures, mounting kits, leads or connectors. In a field where time is money, the fact that Easi-fit alarms are simpler and quicker to install ensures even greater savings.
•More responsive to slow smouldering fires
•Advanced optical chamber with proven extended life capability. Fitted with insect resistant screen
•Alkaline battery supplied already connected to reduce installation errors (does not draw power until alarm is fitted to the mounting plate)
•Hush button for false alarm control
•Interconnects with other EI Professional mains powered smoke & heat alarms
•Separate mains and warning LEDs
•Time and money saving Easi-fit design
•5 year guarantee
•Sensor: Optical, uses light scatter from smoke
•Sensitivity: Complies with BS 5446 Part 1: 2000
•Source: Contains no radioactive material
•Airspeed: Essentially immune to the effect of airspeed.
•Button Test: Simulates the effect of smoke and checks chamber, electronics and horn.
•Ambient Light: Chamber housing design and compensation overcomes problems with stray light.
•AutomaticSelf-Test: Smoke Chamber is tested every 40 Sec. and unit beeps (without LED flash) if it is degraded.
•Insect Screen: Prevents insects or debris entering chamber (1.00mm mesh size)
•Supply Voltage: 230V AC
•Battery back up: 9V Alkaline
•Battery Power-On Indicator: Continuous green LED
•Alarm: Electronic Piezoelectric horn
•Alarm Sound Output: 85dB (minimum) at 3m
•Alarm Status: Red LED flashes every second on unit sensing fire
•Temperature Range: 0° to 40°C
•Humidity Range: 15% to 95%
•Interconnect: Up to 12 interconnected EI140/141/143/144/145/146/161/164/166 smoke or heat alarms, along with an EI128 relay base
•Fixing: Easi-Fit mounting base
•Plastic material: UL94VO flame retardant
•Warranty: 5 year (limited) warranty
•Approvals: Kitemarked to BS5446-1:2000, CE Approved