GJD D-TECT X 500M Wireless Repeater - GJD397

The D-TECT X Repeater can be used to extend the RF range of a D-TECT X detector, or to boost signal in a poor reception area.

The D-TECT X Repeater must be placed within 500 metres line of sight between the D-TECT X detector(s) and D-TECT X Receiver(s). The unit will repeat all signals from D-TECT X detectors within range and as such does not require any programming to function.

SKU
GJD397
Excl. VAT £154.33
£185.20 Incl. VAT

The D-TECT X Repeater can be used to extend the RF range of a D-TECT X detector, or to boost signal in a poor reception area.

The D-TECT X Repeater must be placed within 500 metres line of sight between the D-TECT X detector(s) and D-TECT X Receiver(s). The unit will repeat all signals from D-TECT X detectors within range and as such does not require any programming to function.

Specifications Range 500m (line of sight) Tamper Switches Front and rear tamper switches: case open and removal from wall Wireless Frequency 868MHz Current 23mA (12V nominal) Operating Temperature -10 to +50 Centigrade, Conformal coated electronics for increased stability Housing High impact, flame retardant, UV stabilised Polycarbonate

Protection Rating IP55

Dimensions W210mm x H180m x D79m Weight 750grams NET, 880grams GROSS 

The GJD Power Supply Module provides a 12 VDC output from a 230 VAC input that enables the D-Tect X

Repeater to be conveniently installed with easy access to a mains supply.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account