HYCO SOLO6L Zen Solo 100°C Boiling Water Tap with 6 Litre Boiling Water Tank

A Zen Solo dedicated boiling water tap is a stylish, modern, time and space saving addition to any kitchen. It replaces the need for a traditional kettle in the home, or counter top/ wall mounted boiling water unit in the office.

Instant boiling water is ideal for a wide range of kitchen uses including tea and coffee making, providing a quick start for boiling rice, pasta and vegetables and soaking oven dishes.

The Zen Solo can be installed over a sink or with the stylish, tempered glass design Zen Font.

  •  Dedicated boiling water tap
  •  Instant true boiling 100°C water
  •  Time saving – provides instant hot water so no waiting for the kettle to boil
  •  Space saving – frees up worktop space by eliminating the need for a kettle
  •  Energy saving – no energy wasted boiling more water than is required
  •  Innovative aerogel insulation 
  •  Smart technology algorithms learn and predict usage: on when you need it, off when you don't
  •  Energy efficient - costs just 4p a day, based on standing losses of 17W. Electricity cost 10p/ kWh.
  •  Designed and assembled in the UK
  •  Polished chrome 360° swivel tap
  •  Other tap finishes available as special order at additional cost
  •  Cool touch insulated tap
  •  Status ring on base of tap to indicate ready or heating (green/ red LED)
  •  Safety lock
  •  Flow rate 2 l/m
  •  Available in 3 or 6L. 6L model comprises 2 x 3 litre boiling water tanks with linking kit.
  •  Power Rating 1.55 kW for 3 litre model and 2 x 1.55 kW for 6 litre model
  •  Supplied with expansion vessel and pressure relief valve
  •  Can be fitted with the stylish Zen Font with Drain see Zen Font with Drain
  •  If you are in a hard scale area you may need a scale filter on the inlet side of the boiling tank F3SST
SKU
SOLO6L
Excl. VAT £789.50
£947.40 Incl. VAT

Outer Casing
Tap-polished chrome finish
Other tap finishes available on request at additional cost
Tank-durable high impact PC/ABS

Water Tank
Stainless Steel

Heating Element
Stainless Steel

Thermostat
Electronic to control water up to boiling point

Insulation
Highly efficient aerogel thermal insulation

Initial Draw off
15cups/ 10 mugs based on 167ml cup and 250ml mug.

Double draw off for the 6 litre model.

Safety
Overheat temperature protection (manual re-set).

Safety lock mechanism.

Supplied expansion vessel and pressure relief valve must be fitted.

IP Rating
IPX1

Installation
This appliance must be installed in a frost free environment.

Required hole diameter for mounting tap 32mm – fits in a standard sink. Sink/counter top up to 50mm thick.

The dispensed water temperature can be adjusted down to 98°C on installation if required.

Plumbing
Must be installed by a suitably qualified person.

Intended for connection to the mains water supply.

Minimum water pressure 1 bar.

Maximum supply pressure 4.2 bar. If higher than this a pressure reducing valve may be required.

Supplied expansion vessel and pressure relief valve must be fitted.

Electrical Connection
Installation must comply with current IEE wiring regulations.

Supplied with a pre-wired (1m) BS plug.

Approvals
CE 
WRAS (98°C model only)

Standard Warranty
2 years parts or replacement warranty.

More Information
Dimensions Tap: 288mm x 152mm x 49mm - Tank x2: 459mm x 181mm x 220mm
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account