X

TELL Pager4 PRO 3G.IN6.R1 Standalone GSM/2G/3G Communicator with 6 Inputs

For implementing simple alarm tasks, Control device, Optional communicator for alarm control panels and Standalone GSM/2G/3G communicator

  • 3G/2G communication
  • 6 configurable NO/NC inputs
  • 1 NO relay outputs controllable by events and also remotely
  • Combines the functions of the former GSM and GPRS Pager3 communicators
  • Sends SMS with configurable message for each event to up to 10 phone numbers
  • Voice call to up to 10 phone numbers, with up to 15 recordable messages of 10 seconds each
  • Reporting to CMS (Central monitoring station) via IP to up to 4 IP addresses
  • Compatibility with TELL receivers, as well as receivers using SIA IP DC -09 (with AES 128 encryption) protocol
  • Up to 10 notification templates can be created
  • Defining the priorities of reporting channels
  • Configurable Contact ID event codes for each event including partition and zone options
  • Output control can be customized separately for each event using different operation modes
  • Arming and disarming (dry contact inputs, SMS, voice call, programming software)
  • Extended service events (arming failed, low supply voltage, network connection error, etc.)

Unit comes with seperate Antenna.

SKU
193756
Excl. VAT £95.00
£114.00 Incl. VAT

Technical specification

  • Transmission channel: 3G / 2G / GSM
  • Frequency band: 900/2100 MHz @UMTS, 900/1800 @GSM/GPRS
  • Operating temperature: -20 ºC - +70 ºC
  • Supply voltage: 12-30 VAC/DC
  • Current consumption (maximum): 500 mA @ 12 VDC
  • Current consumption (nominal): 120 mA @ 12 VDC
  • Casing: Plastic
  • Terminal connector design: Connectable
  • Dimensions: 84x72x32 mm
  • Weight: 200 g

Inputs

  • Contact inputs: 6
  • Configurable inputs (NO/NC): 6
  • Adjustable input sensitivity: Yes

Outputs

  • Relay outputs: 1
  • Output control through free GSM call: Yes
  • Output control with commands through GSM voice call: Yes
  • Output control by SMS: Yes
  • Output activation on GSM fault: Yes

Notifications

  • GSM voice call: Yes
  • SMS sending: Yes
  • IP-based reporting to CMS: Yes
  • DTMF-based reporting to CMS: Yes

Supported protocols

  • SIA IP DC-09 protocol: Yes
  • SIA DC-05 (DTMF) protocol: Yes
  • TELLMon protocol: Yes
  • TEX protocol: Yes

Programming

  • Programming method: USB / IP
  • Programming software: Yes

Users

  • User phone numbers for forwarding incoming SMS messages: 1
  • User phone numbers for reporting: 10
  • User phone numbers for output control: 10

Remote monitoring

  • Monitoring station IP addresses: 4
  • Monitoring station phone numbers: 2
  • Individual reporting to monitoring station: Yes

Other functions

  • Configurable internal Contact ID event codes: Yes
  • Security password: Yes
  • Contact ID event code filtering: Yes
  • Event logs / number of stored events: Yes / 1000
  • Caller identification: Yes
  • Individual SMS sending to user phone numbers with predefinable message: Yes
  • Periodic test report: Yes
  • Alarm restriction: Yes
  • Alarm control panel function (arming/disarming, entry and exit delay): Yes
  • Selectable 24h zones: Yes
  • Selectable confirmation request from user phone numbers: Yes
  • NTP server support: Yes
More Information
Dimensions 230mm x 160mm x 35mm
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account