Contact controlled communicator, which can be used as an optional reporting device for alarm control panels, as a standalone GSM reporting device, or as a 6-zone alarm control device with arming and disarming option.

6 configurable NO/NC inputs
1 NO relay outputs controllable by events and also remotely
Combines the functions of the former GSM and GPRS Pager3 communicators
Sends SMS with configurable message for each event to up to 10 phone numbers
Voice call to up to 10 phone numbers, with up to 15 recordable messages of 10 seconds each
Reporting to CMS (Central monitoring station) via IP to up to 4 IP addresses
Compatibility with TELL receivers, as well as receivers using SIA IP DC -09 (with AES 128 encryption) protocol
Up to 10 notification templates can be created
Defining the priorities of reporting channels
Configurable Contact ID event codes for each event including partition and zone options
Output control can be customized separately for each event using different operation modes
Arming and disarming (dry contact inputs, SMS, voice call, programming software)
Extended service events (arming failed, low supply voltage, network connection error, etc.)

Technical specification

• Transmission channel: 2G / GSM
• Frequency band: 850/900/1800/1900 MHz @GSM/GPRS
• Operating temperature: -20 ºC – +70 ºC
• Supply voltage: 12-30 VAC/DC
• Current consumption (maximum): 500 mA @ 12 VDC
• Current consumption (nominal): 120 mA @ 12 VDC
• Casing: Plastic
• Terminal connector design: Connectable
• Dimensions: 84x72x32 mm
• Weight: 200 g

Inputs

• Contact inputs: 6
• Configurable inputs (NO/NC): 6
• Adjustable input sensitivity: Yes

Outputs

• Relay outputs: 1
• Output control through free GSM call: Yes
• Output control with commands through GSM voice call: Yes
• Output control by SMS: Yes
• Output activation on GSM fault: Yes

Notifications

• GSM voice call: Yes
• SMS sending: Yes
• IP-based reporting to CMS: Yes
• DTMF-based reporting to CMS: Yes

Supported protocols

• SIA IP DC-09 protocol: Yes
• SIA DC-05 (DTMF) protocol: Yes
• TELLMon protocol: Yes
• TEX protocol: Yes

Programming

• Programming method: USB / IP
• Programming software: Yes

Users

• User phone numbers for forwarding incoming SMS messages: 1
• User phone numbers for reporting: 10
• User phone numbers for output control: 10

Remote monitoring

• Monitoring station IP addresses: 4
• Monitoring station phone numbers: 2
• Individual reporting to monitoring station: Yes

Other functions

• Configurable internal Contact ID event codes: Yes
• Security password: Yes
• Contact ID event code filtering: Yes
• Event logs / number of stored events: Yes / 1000
• Caller identification: Yes
• Individual SMS sending to user phone numbers with predefinable message: Yes
• Periodic test report: Yes
• Alarm restriction: Yes
• Alarm control panel function (arming/disarming, entry and exit delay): Yes
• Selectable 24h zones: Yes
• Selectable confirmation request from user phone numbers: Yes
• NTP server support: Yes